Multiply: Because one output just isn't enough! If you've got an RGB setup that requires more outputs from the same controller: these splitters are a life saver!
Two Styles: These come available for old school "RGB" connectors, and the industry-standard JST connectors. Make sure you select the right one for your gear!
Plug n Play: With these convenient splitters, there should be no need to cut/splice any of the small wiring associated with your RGB products. They are designed to be plug n play with various RGB accessories, and virtually everything sold by LEDC.
Power: Beware that by splitting the outputs of your RGB Controller, you will be dividing the amount of power it's capable of providing amongst more accessories. What that means? If you're running too much gear off the same controller: you may experience some flickering. Solution: You just need another controller and there's no way around it.
Focus: Since 2005, we have focused our efforts on lighting and that's it. Experience means we know the products. We know the technology. We know our competitors, and most importantly, we know our customers. We like to wrench. We like to drive, we like to ride, and like you: we demand the best for whatever it is that gets us going. That's why at LED Concepts; we only stock the shelves with today's best, brightest, and most badass LED Lighting upgrades.
SPLITTER: 1x RGB or JST
WARRANTY: 2 Years
CONTROLLERS: JST or RGB
WIRING: All 4-pin RGB Systems
POWER: Depends on Controller
RGB LENGTH: 6 inches
JST LENGTH: 3 inches
PIN OUT: GRGB (4 wire)