Gatling Gun 1.0: Inspired by a machine gun, these shrouds have blocks arrayed around their perimeter and a textured metallic-looking finish giving them a more radical look. With Integrated lighting vents, textured metallic surface finish, and a modern design all combine to give the Gatling Gun 1.0 shrouds their unique appeal.
In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.
A or B: At LEDC, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a "B stock" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the "A Stock" Shrouds.
Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Weld is also recommended in order to prevent the shrouds from vibrating loose over time.
LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new Pivot Switchback and Prism RGB systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the "In Action" images section below. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.
Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ-Lock cutting wheels to make the job easy.
Focus: Since 2005, we have focused our efforts on lighting and that's it. Experience means we know the products. We know the technology. We know our competitors, and most importantly, we know our customers. We like to wrench. We like to drive, we like to ride, and like you: we demand the best for whatever it is that gets us going. That's why at LED Concepts; we only stock the shelves with today's best, brightest, and most badass LED Lighting upgrades.
SHROUDS: 2x Gatling Gun 1.0
CENTRIC RINGS: Optional
LED HALOS: Optional
WARRANTY: 5 Years
SWAG: Morimoto Decal
MORIMOTO PROJECTORS: All except Matchbox and FX-R (may need trimming)
OEM PROJECTORS: Most except TL, LS430, LS460, Q45
LENS DIAMETERS: 2.5" and 3" Compatible
LED HALOS: See Size-Guide "In Action" section below
MOUNTS WITH: Centric Rings & JB Weld
FRONT HALO SIZE: 80mm
VENT HALO SIZE: 100mm
FINISH: Forever Finish Chrome
Not even close. Requires cutting out the inner mount tabs and completely sanding out and smoothing everything around the lens to fit a 3" (inch) projector. Still came out awesome but a Dremel will be needed for any make 3" projector.
I used this shroud for my retrofit on a Morimoto Mini H1 6.0 projector and it turned out great. what really looks good was the 100mm LED halo behind the vents really set the headlight apart from the others! Great quality and looks amazing!