Perfect: The Morimoto Standalone wiring harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to "bulb out" warning lamps and flickering caused by "can-bus" systems.
Effective: Each canbus headlight harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Check out this video showing just how simple these are to setup.
Powerful: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicle's factory headlight circuit.
Euro-Centric: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. The Standalone wiring harnesses DO NOT however work well on domestic cars/trucks like Chrysler/Dodge/Jeep. You guys need Morimoto's "Mopar Spec" Stuff!
Simple: With fewer connections to make compared to something like a full relay wire harness; even your mom could set this thing up it's that easy. Input here, output there...done.
Sold as a pair: The standalone canbus headlight harnesses come as a pair, one for each side of the car. They are meant to be used as a substitute for a full relay harness, not in addition to one.
NOTE: Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. For vehicles with DRLs on the high beam bulb, no problem.
Focus: Since 2005, we have focused our efforts on lighting and that's it. Experience means we know the products. We know the technology. We know our competitors, and most importantly, we know our customers. We like to wrench. We like to drive, we like to ride, and like you: we demand the best for whatever it is that gets us going. That's why at LED Concepts; we only stock the shelves with today's best, brightest, and most badass LED Lighting upgrades.
What you needs to know
HARNESS: 2x Morimoto Standalone CanBus 2.0
INPUT ADAPTERS: 2x Selected Fitment
WARRANTY: 2 Years
CANBUS SYSTEM: Most European and American vehicles (VW, Audi, Benz, Jeep, Dodge)
INCOMPATIBLE: Vehicles with DRL on low beam (with pulsing current)
ORIGINAL BULB SIZE: All sizes available
HID SYSTEMS: 35w or 55w
BI-XENON PROJECTORS?: You'll need High Beam Splitters
INPUT: 2 Pin (9006, H1, H7, H11 etc)
OUPUT: 9006 female (industry standard)
HIGH BEAM: 2-pin Molex Female (H4, 9007, H13 only)
SHELL MATERIAL: Die-Cast Aluminum
FINISH: Black Painted