Lucky You: We know how it goes: even with the stock fog lights turned on to supplement the low beams, you still can't see anything at night. Luckily for you, the Morimoto Retro-Quik system is designed as a direct bolt-on upgrade for a big performance boost inside the headlights on all first-gen Mazda6 cars.
Bi-Xenon Projectors: Morimoto's most modern bi-xenon, the Mini H1 7.0, was an instant winner upon launch. Representing the first full overhaul of the Mini H1 since way back when the 1.0 came out, it's now one of the most advanced headlight projectors in the world today. Revised reflector optics paired with their curved cutoff shield produces one of the widest low beam patterns we've ever seen, and a high beam that will easily go the distance. Kuria Optic clear lenses maximize intensity throughout, and keep the cutoff line sharp, colorful, and attractive. New side-action solenoids are more than 3x stronger than the old and fussy vertically-sprung units. Result: Maximum light on the ground, zero glare to oncoming traffic.
Mounting Hardware: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of the kit are designed to adapt the Morimoto Mini 7.0 Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome.
Optional HID Ballasts: Designed in California by Morimoto's engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today's most modern iteration of a model that has sold more than half a million units since inception, and we don't think it can really get any better!
Optional H1 HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight--and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same lumin Osity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Optional Relay Harness: As one of the most important parts in any HID lighting upgrade, don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are or how good your bulbs are, if your harness is a piece of crap, when it gives out your headlights are gonzo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. With triple-sealed twin relays, 14ga. stranded copper wiring, over-molded fittings, and plug-n-play functionality, it will ensure everything functions properly and permanently from the original in-cabin controls. It's easily the best headlight wire harness out there.
Optional High Beam Splitters: Double high beams?! whaaaat! Put simply, the optional Morimoto high beam splitters allow you to make this feature work easily without any cutting or splicing to the factory wiring by diverting power from the halogen bulb into the projector's high beam solenoid, making them both work at the same time.
Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new headlights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.
NOTE: If you have a Mazdaspeed 6 with factory HIDs, the brackets in this kit will still work for your car, however you will need new H1 HID bulbs, splitters, and ballast adapters to work with the factory HID components. Please Contact Us to arrange a special kit just for your Speed6!
Focus: Since 2005, we have focused our efforts on lighting and that's it. Experience means we know the products. We know the technology. We know our competitors, and most importantly, we know our customers. We like to wrench. We like to drive, we like to ride, and like you: we demand the best for whatever it is that gets us going. That's why at LED Concepts; we only stock the shelves with today's best, brightest, and most badass LED Lighting upgrades.
What you needs to know
Projectors: 2x (One Pair) Mini H1 8.0 Bi-Xenon Projectors
Hardware: 2x Custom RQ Brackets, Mounting Hardware
Optional Ballasts: 2x Morimoto XB35 HID Ballasts
Optional Bulbs: 2x Your Preference of H1 Bulbs
Optional Wiring: Your Preference
Optional Accessories: High Beam Splitters and Housing Sealant
Warranty:5 Years (Click for Details)
Mazda 6: 2002-2008
APPLICATION: HID and LED projectors are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE Note: This usage regulation is not unique to Morimoto projectors. All LED and HID projectors from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA. To find street legal LED headlight assemblies, CLICK HERE
HOMOLOGATION ECE: NO
DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA)
Intensity: 2,800-3,500lm (est.)
50w Ballasts: Not Compatible
Operating Temp: -40C to 125C
Color Rating: 3000K (Golden Amber), 4000K (OEM HID Warm White), 5000K (Ice White), 6000K (Neutral White)
Rated Lifespan: 2,500hrs (3-5yrs)