Headlight Build Materials
JB Weld Construction EpoxyB-ACC-JBWELD-LEDC
[ In Stock: 0 pieces ]
Starting at $X.XX/month with
Trusted: Customers often ask, what's the best epoxy for building my retrofit? Our answer is always the same: JB Weld! We use it, all the major professional retrofitting shops use it, you should too! There's cheaper stuff out there, but there's also no sense in saving $1-2 and risking a failure too.
Steel Stik Putty Epoxy: JB Steel Stik is perfect for tacking your projector into place during the alignment phase of the retrofit.
Kwik Weld: Kwik Weld is the perfect final layer of epoxy to permanently set your projector in place after the Steel Stik is dried. Essentially turns the projector and original reflector into one piece.
Kwik Weld (Pro Size) Same exact stuff as the normal Kwik-weld, but contains much more! The Pro-size has 5x more than the standard pack.
JB Plastic Weld: JB Plastic Weld is designed for the bonding or repair of plastics and plastics alone. Shroud to centric ring? Broke something plastic inside the headlight? Not to fear, JB Plastic Weld is here!
Don't Skimp! You will need lots and lots of epoxy - and we're not saying this just to sell more stuff, based on experience, you will need it. It's easier to add extra glue during the retrofit than to deal with a broken installation due to an insufficient amount of epoxy. We recommend 1x Steel Stik and 1x Pro Size Kwik Weld per retrofit!
Deals! Sure you could roll up to the local hardware store and buy JB Weld, but consider this. A) You're probably going to need it, so why not get it now? B) We're gonna save you a trip out, and C) Our price is the same or better than locally, and there's no tax on it! (if you're outside of GA, at least)
Focus: Since 2005, we have focused our efforts on lighting and that's it. Experience means we know the products. We know the technology. We know our competitors, and most importantly, we know our customers. We like to wrench. We like to drive, we like to ride, and like you: we demand the best for whatever it is that gets us going. That's why at LED Concepts; we only stock the shelves with today's best, brightest, and most badass LED Lighting upgrades.
What you needs to know
STEEL STIK: 1x 2oz Putty Tube
KWIK WELD: 2x 1oz Liquid Tubes
KWIK WELD PRO: 2x 5oz Liquid Tubes
PLASTIC WELD: 1x 25mL Liquid Syringe
JB STEEL STIK: Perfect for tacking in projectors
JB KWIK WELD: Permanently bonds metal and plastic
JB PLASTIC WELD: Ideal for plastic to plastic bonds and repairs
STEEL STIK STRENGTH: 900psi
STEEL STIK SET TIME: 5 Minutes
STEEL STIK CURE TIME: 1 Hour
KWIK WELD STRENGTH: 2,424psi
KWIK WELD SET TIME: 6 Minutes
KWIK WELD CURE TIME: 4-6 Hours
PLASTIC WELD STRENGTH: 4,000psi
PLASTIC WELD SET TIME: 5 Minutes
PLASTIC WELD CURE TIME: 1 Hour